Split Sleeve Repair Clamps

Adi-Sleeve is based on manufacturing and fabrication facility in India, we produce and supply Split-Sleeve, Split sleeve repair clamp, Pipe Fit Repair Clamps, Expanded Body Split Repair Sleeve, Split Sleeve Shaft Repair, Split Sleeve Clamp, Split Sleeve Pipeline Leak Repair Clamps.

AdiSleeve Split- Sleeves are repair clamps that are useful for sealing corrosion- or damage-related leaks in submerged and onshore pipelines. Installing Adisleeve Split clamp is simple and secure.

Split Sleeve Repair Clamps.

When the clamps on the line is fully torqued, the leak is shut. The fitting can be welded to the pipeline while it is under flow for a long-lasting fix. Aditya Steel has the ability to remove and recondition any fittings that are not welded to the line so that the customer can restock safety supplies.
The test pressure for clamps is 1.5 times the design pressure. During installation, Steelm GirderRings guard against packing movement and damage. The typical operating pressure is 1000 maop.
Different lengths and higher working pressures are also offered. In situations where a stocktting is not appropriate, custom emergency repair ttings are a possibility.

Aditya Steel Engg. is well known Manufacturers of Split Sleeve Repair Clamps, Suppliers of Split Sleeve Repair Clamps, Exporters of Split Sleeve Repair Clamps, Factory made Split Sleeve Repair Clamps, oil and gas Split Sleeve Repair Clamps.

Design Features and Methods.

Safety :

The clamps are fully compensatory pressure vessels, hydrostatically tested to 1.3 times the rated working pressure (as per ASME Section VIII Div.1 clause UG-99). All Clamps are equipped with a 1/2” or 1” NPT vent port depending on size and clients requirements.

Design Criteria and Industry Standards :

All split clamp are tested in accordance with the API Specication 6H, “Specification for End Closures, Connectors, and Swivels”, ASME BOILER AND PRESSURE VESSEL CODE, Section VIII; and with ANSI standards B-31.3, B31.4, & B31.8, where applicable.
Certication: EN 10204 3.1

Ease of Installation and Maintenance :

All split clamps are designed to be installed with the most common tools available and are readily field repairable, including full seal replacement.

Economy :

Split Sleeve Repair Clamps are designed utilizing the latest technology, allowing optimization of design techniques and materials, resulting in lower weight, Split Sleeves are suitable for sour environment This type of split sleeve is designed to be used in hydrogen sulfide (H2S) bearing hydrocarbon service.
For sour services, the body material will meet NACE MR0175

Certification and Testing :

Non destructive testing (NDT):

  • 100 % magnetic particle inspection (MPI) for stifener to shell
    weld (fillet)
  • 100 % ultrasonic testing of vent plug welds
  • 100 % MPI of hinge welds
    Hydrotest as per ASME Section VIII Div.1 clause UG-99
Standard Body Material :

-ASTM A350 Gr. LF2
-ASTM A216 Gr. WCC
-ASTM A516 Gr. 70

  • Standard bolting is ASTM A193 Gr.
    B7with ASTM A194 Gr. 2H nuts
Split clamp material Specifications :

ANSI pressure classes 300, 400, 600, 900 and 1500
Design based on: ASME Sec. VIII, API 6H , ANSI B31.4, B31.8 and Split clamp Software 3S)
Design control and stress analysis with Finite Element Package
Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70
(Suitable for normally corrosive services)
Stud material: A193 Gr. B7
Nut material: A 194 Gr. 2H
Coating: Yellow Epoxy Polyamide, standard or Marine epoxy. The highest quality NBR or VITON elastomer seal precisely compatible with the line fluid and ambient temperature will be installed into the split sleeves.

NBR temperature range is from – 20 °C to + 80 °C
HNBR temperature range is from – 20 °C to + 150 °C
VITON temperature range is from – 20 °C to + 200 °C

Gaskets are replaceable without any special tools.
Girder rings can be installed upon cleints request.
Double Row Sealing (DRS) design is also available. This special design is more suitable for where probable leakage is much costly or dangerous; such as gaseous services & onshore applications.

Weldable split clamp :

All clamps can be fully prepared for welding after installation

Manufacturers and exporters of pipe repair sleeve clamps in India.

Manufacturers of Split-Sleeve, manufacturers of Split sleeve repair clamp, manufacturers of Pipe Fit Repair Clamps, manufacturers of Expanded Body Split Repair Sleeve, manufacturers of Split Sleeve Shaft Repair, manufacturers of Split Sleeve Clamp, manufacturers of Split Sleeve Pipeline Leak Repair Clamps, Weldable split clamp, manufacturers of pipe clamp, manufacturers of bolted split clamp, manufacturers of high pressure pipe clamps.

Our All Product Facility

Api 5l Pipes & Tubes., ASTM A335 Alloy Pipes, Stainless Steel Pipes & Tubes., Stainless / Carbon Steel Plates and Sheets., Chrome Moly A213 Boiler Tubes, ASTM A213 T5 Chrome Moly Tubes, ASTM A213 T9 Chrome Moly Tubes, ASTM A213 T11 Chrome Moly Tubes, ASTM A213 T22 Chrome Moly Tubes, ASME SA387 Chrome Moly Steel Plate, Swaging Boiler Tube – Swaged Tube, Pipe Fittings., Stainless Steel Fittings, B16.9 Butt welded Fittings, ASME/ANSI B16.9 – Fittings, B16.9 Butt Welded Unequal tee, B16.9 Barred Tee / Bar Tee, Butt Welded Con. and Ecc. Reducer, Butt Welded Straight (Equal) Tee, Butt Welded End Cap, ASTM A234 Chrom-Moly Reducer, ASTM A234 Chrom-Moly Tee, B16.5 – Pipe Flanges & Flanged Fittings, EN 1092-1 Flanges , B16.9 High Nickel Alloy Fittings, B16.9 Hastelloy C276 Fittings, B16.9 Inconel 625 Fittings, Ferrule – Tube Inserts, Alloy 602CA – Ferrule (Tube Insert),  Alloy 601 Ferrule (Tube Insert), High Temp. Tube Insert Sleeve, Metal Tube Inserts (Ferrules), Virgin PTFE Tube Inlet Ferrule, Sleeve ,Pipe Sleeving, Internally Insert Pipe Sleeve, Internally Pipe protaction Sleeve, Pipe Insert Sleeve, Repair Pipe Half Sleeve, Industrial Valve’s, Flanges, Gaskets & Flange Insulation Kit, Monolithic insulation joint – MIJ, Fasteners, Steel Equivalent, Pipeline Leak Repair Clamps

We Serve to Many Continent and Countries.

error: Content is protected !!